topblog Ivoire blogs

08/07/2018

OBDSTAR X300 DP plus VS X300 DP VS Lonsdor k518ise

Post topic: OBDSTAR X300 DP PLUS VS X300 DP VS Lonsdor K518ISE in the software functions, vehicle coverage, features, hardware etc. And followed with obdstar X300 DP plus A package Vs B package Vs C package. Finally ends with obdstar X300 DP plus features & real pictures.

Part 1: obdstar X300 DP plus VS X300 DP VS Lonsdor k518ise

7-1

Part 2: obdstar X300 DP plus obdstar X300 DP plus A package Vs B package Vs C package

7-2

Part 3: obdstar X300 DP plus features & real pictures.

Hardware Advantages:

1.  Built-in VCI box
2.  8-inch touch screen

7-3

3.  Chargedirectly via OBD interface
4.  Practical and high-end gift box
5.  Industrial design with silicone case
6.  Back bracket design:prop on the steering wheel or stand on the table
7.  With 4 Toyota simulation keys (the fifth is coming soon)

7-4

Simulated key 1 applies to the vehicle with 94/D4 type of smart key;
Simulated key 2 applies to the vehicle with 98 type of smart key;
Simulated key 3 applies to the vehicle with 88/A8 type of smart key;
Simulated key 4 applies to the vehicle with A9 type of smart key;

8.  P001 programmer: EEPROM adapter + RFID adapter+ Key Renew adapter

7-5

9.  Add the clip of reading SOP 8PIN EEPROM

7-6

10. C001/C002 circuit board to read and write chip data with weldingC001 circuit board

7-7

Image 1: C001 circuit board is compatible with old NO. 3 and 4 circuit boards, applying to EEPROM chip dismantling and reading, Tianjin FAW and VIZHI immobilizer coil initialization and other functions.C001 circuit board

7-8

Image 2: C002 circuit board is connected by W001, W002 or W003 without welding the chip.

11. IMMO induction coil to detect the key induction coil failure of the vehicle.

7-9

12. Add wiring harness of ECU reading by OBD (for ECU cloning and switch activation)

7-10

ECU Programming/Cloning

ECU cloning means copy ECU, that is the OBDSTAR X300 DP Plus copies the data from the original car ECU, then write it into another same ECU hardware, so that it can achieve the same function as the original ECU.

When you want to change the new ECU or the second ECU, if you use X300 DP Plus to clone via OBD, you won’t need to go to the 4s store to do the online programming or dismantle ECU to weld, read & write.

ECU clone Pros :

No need to go to 4S shop, convenient, fast and save money.

Simplify the operating steps, even the amateur can also operate.

No need to dismantle and weld the ECU to read & write, it is zero risk to clone ECU via OBD with the X300 DP Plus.

Switch activation function

Nowadays, many car models’ accessory power supply of the dashboard or audio equipment needs to be activated to enter the boot status through the related module CAN.

However, when the car technician maintains the dashboard / audio equipment, the main unit is out of the CANBUS network so it maybe won’t boot.  OBDSTAR Scanner X300 DP plus” switch activation function” can emulate the CANBUS communication to active the power supply of dashboard / Audio so that it can enter the boot status, then it will test and verify the dashboard and the Audio, also the technician can save money avoiding to purchase many the boot platform and cables of kinds of car models

13. Adds the “Help” functionincluding the testable car models, update notice, special features, help instruction, wiring diagram etc.

Testable car models: The user can read the testable car models and year.

Update notice: The user can read all of the update content.

Features: The user can read all of the special features and the functions that only X300 DP Plus supports.

Help instruction: Built-in the guide and instruction for each car model or function.

Wiring diagram: Built-in ECU wiring diagram, more intuitive and convenient.

Pictures mean a lot:

7-11

obdstar DP plus accessories:

7-12

obdstar X300 dp plus accessories

OBDSTAR X300 DP Plus On CnAutotool.com Package:

7-13 7-14 7-15 7-16 7-17

26/06/2018

Caterpillar ET 2018A Electronic Technician Diagnostic Software

 

6-3

Cat electronic technician 2018A is an updated version of the caterpillar dealer diagnostic software.

Cat works with the CAT ET family.
The recommended adapter is a Caterpillar Communication Adapter III Kit PN 538-5051 (Replaces 466-6258).
This diagnostic app allows you to: Change vehicle’s parameters Lock / Unlock parameters Diagnose and reconfigure Reading of error codes ECM Flash

What’s New – 2018A
What’s New – 2018A

Trainer Update – 988K XE Wheel Loader

The 988K XE Wheel Loader has been added to the Trainer application.

What’s New – 2017C

Preferences Option to Save a Product Status Report to PDF

The Preferences dialog for the Product Status Report has changed. The dialog contains a new checkbox to automatically save a Product Status Report as a PDF file when the report is created. The service tool will continue to automatically save Product Status Reports as an XML file.

6-1
What’s New – 2017B

Product Status Report Updates
The Product Status Report has been updated to include certain history features supported by the ECM, such as the after-treatment Regeneration History and the Service Test History.
Winflash Screen Update
The screen for the Winflash feature has been updated. A new Expand All button opens all sections of the screen to show all details for ECMs detected by WinFlash. A new Collapse All button hides all sections of the screen, except for header rows showing detected ECM names.

PC, Communication Hardware, and Cable Requirements
To run the service tool, the next PC, communication hardware, and cable requirements must be met. NOTE: The minimum PC Configurations should not be used as a standard when buying new personal computers for service tool purposes. If the existing equipment meets these minimum requirements, it will run the Heavy Duty Diagnostic.

PC Requirements
Recommended Configurations
PC containing a 2.0 GHz dual-core processor
3GB RAM
3GB of available hard disk drive
DVD-ROM drive (optionally)
15.4-inch XGA Screen (1280×1024 compatible)
Microsoft Windows? 7 Professional or Windows 8 Professional, Windows 10 Professional (Not tested with Home Edition) (Note: Windows 8 RT is not supported)
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)
USB 1.1 or 2.0 port (for use with Comm Adapter 3)
Ethernet RJ45 connector
Built-in pointing device or mouse
For security purposes, Microsoft Internet Explorer version 11 or newer or Microsoft Edge is recommended.
Note: The most recent version of Microsoft? Internet Explorer may not be validated to work with the service tool.
Wi-Fi (for the Wireless Comm Adapter 3)

6-2

Minimum Configurations
PC containing a Pentium 2 GHz processor or greater
1GB RAM
500MB of available hard disk drive
CD-ROM drive
Super VGA monitor or display (1024×768)
Microsoft Windows? 7 Professional or Windows 8 Professional, Windows 10 Professional (Not tested with Home Edition) (Note: Windows 8 RT is not supported)
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II On CnAutotool)
USB 1.1 or 2.0 port (for use with Comm Adapter 3)
Ethernet RJ45 connector
Built-in pointing device or mouse
For security purposes, Microsoft Internet Explorer version 9 or newer is recommended. Note: The most recent version of Microsoft? Internet Explorer may not be validated to work with the service tool.

Communication Hardware
Caterpillar Communication Adapter III Kit PN 538-5051 (Replaces 466-6258)

Configuring Cat Electronic Technician to use the Communication Adapter 3
For Cat Electronic Technician to work with the Communication Adapter 3, the settings must be changed to select the Communication Adapter 3 as the Communication Interface Device:
Step 1 Start Cat Electronic Technician.
Step 2 Click the Stop Connect button when it appears.
Step 3 Select the Utilities menu.
Step 4 Choose “Preferences > Modify…”.
Step 5 Select the Communications tab.
Step 6 Select Cat Comm Adapter 3 (RP1210) and click OK.
NOTE: Because a growing number of products require multiple data link service, the “Enable Dual Datalink Service” checkbox has been pre-selected.
Servicing ECMs on more than one data link requires this checkbox to be enabled.
Failure to do this will result in undetected ECMs and reduced functionality.

19/03/2018

Lonsdor K518ISE Program Ferrari 458 Remote Key

Lonsdor K518ISE Key Programmer support Ferrari 458,F12,F149 key programming. Here is a case about Lonsdor K518 program Ferrari 458 remote key.

Device: Lonsdor K518ISE key programmer

Key type: Ferrari 458 remote

Test procedure:

Step 1: Backup immo data

Step 2: Program key

Step 3: Program remote

Test result: success!

Detail steps check the photos:

Choose Ferrari Brand

20-1

Choose The car model 458

20-2

Choose Immobilizer

20-3

Choose Program remote

20-4

Show the detail info and read the data

20-5

20-6

20-7

Backup the data

20-8
20-9

Star to Program key and enter the pin code to program complete
20-10

20-11

20-12

20-13

20-14

Then Program remote

20-15

20-16

20-17

20-18

20-19

20-20

Obd2 Key Programmer lonsdor k518ise program ferrari key

Success.