topblog Ivoire blogs

08/07/2018

OBDSTAR X300 DP plus VS X300 DP VS Lonsdor k518ise

Post topic: OBDSTAR X300 DP PLUS VS X300 DP VS Lonsdor K518ISE in the software functions, vehicle coverage, features, hardware etc. And followed with obdstar X300 DP plus A package Vs B package Vs C package. Finally ends with obdstar X300 DP plus features & real pictures.

Part 1: obdstar X300 DP plus VS X300 DP VS Lonsdor k518ise

7-1

Part 2: obdstar X300 DP plus obdstar X300 DP plus A package Vs B package Vs C package

7-2

Part 3: obdstar X300 DP plus features & real pictures.

Hardware Advantages:

1.  Built-in VCI box
2.  8-inch touch screen

7-3

3.  Chargedirectly via OBD interface
4.  Practical and high-end gift box
5.  Industrial design with silicone case
6.  Back bracket design:prop on the steering wheel or stand on the table
7.  With 4 Toyota simulation keys (the fifth is coming soon)

7-4

Simulated key 1 applies to the vehicle with 94/D4 type of smart key;
Simulated key 2 applies to the vehicle with 98 type of smart key;
Simulated key 3 applies to the vehicle with 88/A8 type of smart key;
Simulated key 4 applies to the vehicle with A9 type of smart key;

8.  P001 programmer: EEPROM adapter + RFID adapter+ Key Renew adapter

7-5

9.  Add the clip of reading SOP 8PIN EEPROM

7-6

10. C001/C002 circuit board to read and write chip data with weldingC001 circuit board

7-7

Image 1: C001 circuit board is compatible with old NO. 3 and 4 circuit boards, applying to EEPROM chip dismantling and reading, Tianjin FAW and VIZHI immobilizer coil initialization and other functions.C001 circuit board

7-8

Image 2: C002 circuit board is connected by W001, W002 or W003 without welding the chip.

11. IMMO induction coil to detect the key induction coil failure of the vehicle.

7-9

12. Add wiring harness of ECU reading by OBD (for ECU cloning and switch activation)

7-10

ECU Programming/Cloning

ECU cloning means copy ECU, that is the OBDSTAR X300 DP Plus copies the data from the original car ECU, then write it into another same ECU hardware, so that it can achieve the same function as the original ECU.

When you want to change the new ECU or the second ECU, if you use X300 DP Plus to clone via OBD, you won’t need to go to the 4s store to do the online programming or dismantle ECU to weld, read & write.

ECU clone Pros :

No need to go to 4S shop, convenient, fast and save money.

Simplify the operating steps, even the amateur can also operate.

No need to dismantle and weld the ECU to read & write, it is zero risk to clone ECU via OBD with the X300 DP Plus.

Switch activation function

Nowadays, many car models’ accessory power supply of the dashboard or audio equipment needs to be activated to enter the boot status through the related module CAN.

However, when the car technician maintains the dashboard / audio equipment, the main unit is out of the CANBUS network so it maybe won’t boot.  OBDSTAR Scanner X300 DP plus” switch activation function” can emulate the CANBUS communication to active the power supply of dashboard / Audio so that it can enter the boot status, then it will test and verify the dashboard and the Audio, also the technician can save money avoiding to purchase many the boot platform and cables of kinds of car models

13. Adds the “Help” functionincluding the testable car models, update notice, special features, help instruction, wiring diagram etc.

Testable car models: The user can read the testable car models and year.

Update notice: The user can read all of the update content.

Features: The user can read all of the special features and the functions that only X300 DP Plus supports.

Help instruction: Built-in the guide and instruction for each car model or function.

Wiring diagram: Built-in ECU wiring diagram, more intuitive and convenient.

Pictures mean a lot:

7-11

obdstar DP plus accessories:

7-12

obdstar X300 dp plus accessories

OBDSTAR X300 DP Plus On CnAutotool.com Package:

7-13 7-14 7-15 7-16 7-17

Les commentaires sont fermés.