topblog Ivoire blogs

03/12/2017

Launch Creader Professional CRP129 Premium and CRP123 Premium Comparisons

Good news that we have the LAUNCH CRP 123 Premium and CRP 129 Premium in stock now , and they are the new solution for car owners and services for express-diagnostics, with the maximum possibilities at relatively low cost.

For models LAUNCH CRP 123 / 129 Premium device capabilities allows read and erase error codes with explanations, read the current data on the four basic systems of the car – engine, transmission, ABS (ESP, DSC), Airbag (SRS), and for CRP 129 Premium are offered additional features for programming and service intervals resetting, some basic adaptations for the main important functions and ability of diagnostic of the system EPB (electronic parking brake) / SBC ( Sensotronic brake control module).

 

Solution CRP 129 Premium on CnAutotool.com is especially useful for small services, service reception points and body/repair services for express-diagnostics depending on the requirements to the level of diagnostics, and low-cost CRP 123 Premium is suitable even for private use of individuals who have some of their own cars. Little size equipment allows to take it easily with you or express mechanic and make right on the road preliminary diagnosis. Easy and intuitive menu allows using it to anyone, even a service mechanic or private person

 

More details for the comparisons , please check as bellow :

 

Model

CRP 123 Premium new!

CRP 129 Premium new!

 

Supply voltage, V

9-18 V

9-18 V

Connection type, ability to use the

adapters for old diagnostic sockets

OBD-II,

not supported

OBD-II,

not supported

Complete scanner OBD-II mode

+ , all functions

+ , all functions

Read and delete factory fault

codes (for factory protocols)

+, more than 40

world brands

+, more than 40

world brands

Display the current

data in digital form

+, up to 4 parameters

simultaneously

+, up to 4 parameters

simultaneously

Display the current data

in graphical form

+, up to 4 parameters

on one chart

+, up to 4 parameters

on one chart

Recording of the current

data and screenshots  in

the device memory and replaying

+, up to 32 records

+,  up to 32 records

Replaying of the saved data,

Freeze Frame and historical

error codes

+

+

Read of VIN

(control units that support this feature)

+

+

Reading and display of the

identification information

of the control unit

+

+

Search the fault codes by

entering them with the buttons

+

+

Built-in help, DTC hints and

location of the diagnostic socket (DLC)

+

+

GOLO functions

Help, community and

online diagnostics

-

-

Reset and setting service intervals

inspection 1, 2

and inspection mileage

-

+

Steering  angle sensor adaptation

and reset, brake pad

locking/unlocking and checking

-

+

Number of supported systems

on factory diagnostic protocols level

4 main systems

(ENG,ABS,AT, SRS)

4 (ENG,ABS,AT, SRS)

+ 1 (EPB/SBC)

Multilanguage interface

+

+

Recording in the memory and printing

of the diagnostic reports via PC

+

+

Quick free update

via Internet

+

using the

USB 2.0

+

using the

USB 2.0

Screen

color, 4”, 480*320,

LCD TFT

color, 4”, 480*320,

LCD TFT

Support of Wi-Fi,

USB

no,

USB 2.0

no,

USB 2.0

Built-in clock and

switchable buzzer

+

+

Operating system

Windows CE 5.0

embedded

Windows CE 5.0

embedded

Main technical parameters

CPU 120 Mhz single core,

RAM 1 Mb, 4 Gb SD Card

(up to 32 Gb)

CPU 120 Mhz single core,

RAM 1 Mb, 4 Gb SD Card

(up to 32 Gb)

Support of application

installations

-

-

Web browser,

e-mail client

-

-

Multimedia functions

(video, photo, etc.)

-

-

Additional prospect

download in English

Short update manual

  download in English (protected)

 

There also have a video of Launch X431 scan tool CRP123 Premofor your reference as bellow , please check

Video 

 

http://cnautotool.blogs.jcsearch.com/30174/Launch_Creader_Professional_CRP%31%32%39_Premium_and_CRP%31%32%33_Premium_Comparisons

08/10/2017

What are the meanings of your car noise

Your car has been producing this kind of rattling sound for a long time, yet you can’t remember the exact time when it starts. Knowing the causes of these common car noises and getting them fixed sometimes can save you a lot of trouble and also much cost.

What is that rattling? Is it serious? We all can get a little paranoid about a new sound our car is making. Those sounds can certainly be annoying, but what people don’t realize is sometimes those sounds may be linked to something more serious.

About 7 percent of car crashes are caused by some kind of vehicle failure, with tire degradation and brake system failures topping the Auto ECU Programmer, according to the National Motor Vehicle Crash Causation Survey from the National Highway Traffic Safety Administration. But tire and brake failure aren’t the only types of vehicle problems that can lead to accidents – engine, steering system and suspension failures also cause crashes.

“Getting your oil changed, tires rotated and brake pads checked regularly not only helps keep your car running smoothly, but it also helps keep you and your family safe,” says Matt Myers, senior vice president of claims with Erie Insurance. “It’s also important to check your car’s transmission fluids and get the 50,000-mile and 100,000-mile checks. It might sound like a lot, but regular preventative maintenance is the best way to keep those strange car noises – and accidents – to a minimum.”
Here are six common car noises people hear and what they could mean:

Humming or Groaning
When you hear humming while driving at faster speeds, it’s a sign there probably is some wear on your tires, which can lead to serious issues. It could be located on the insides of your tires, which is hard to diagnose on your own, but not having it checked is a risk, because the steel belts in the tire might be coming apart.

Growling
This noise could change or even go away when you turn the diagnostic tools, but it is usually caused by a defective front wheel bearing. The change in noise could be a result of the shift in the weight of the car as you turn.

Whining and Creaking
You might hear these noises backing up or turning. It could be the result of a ball joint or tie rod seizing up.

Squeaking
This can be a high-pitched, steady annoyance that lets you know it’s time to get your brake pads checked or replaced.

Grinding
This sound means two pieces of metal are touching when they shouldn’t be. This sound could be a multitude of things: brakes, powertrain, suspension or something else. Whatever the case, a grinding sound means you need to get your car checked out as soon as possible.

Hissing
A hissing sound might occur after you turn off your ignition and can sometimes be followed by smoke from under your hood.
The next time you hear strange noises coming from your Professional Diagnostic Tools, don’t just turn up the radio to drown them out – get them checked by a mechanic. Ignoring those noises today could lead to a dangerous and expensive situation tomorrow.

http://cardiagnostictools.hatenadiary.com/entry/2017/10/08/182145

22/09/2017

How to use Tango programmer to copy a key transponder

Firstly, run the Tango transponder programmer software and select vehicle and read information in the “Info” window. Watch the data location field to locate the memory chip. Locate the chip inside of the immobilizer and read it. Save the read data (dump).
Click the “OPEN IMMOBILIZER FILE” button to download the saved dump.

Then the Tango programmer will start analyzing the dump.
When the programmer confirm the dump is correct, the “WRITE” button will be activated and the “Keys” window will display the range of key numbers that can be created.
Check the “Info” window, especially the Allowed transponder field to make sure the Auto Key Programmer you use is of the right type.

2-1

Place the transponder into the coil on Tango key programmer.
Choose the key cuts you want create in the “Keys” window.
Click the “WRITE” button.
The writing process will start and transponder will be stored with the appropriate data.
Save a new immobilizer dump when the Tango key programmer software asks you to.
Save a standard File Save dialog when it is displayed on the program.
The new data is saved and must be written into the immobilizer
2-2

Write the new dump into the immobilizer. The immobilizer is ready to operate with the created a new transponder .
Finish.
Anyway,this? CnAutotool.com is Simple operation,you can try it!

http://keyprogrammertool.blogspot.com/2017/09/which-auto-key-programmer-best-for.html